This machine is a special machine for PC material 5 gallon pure water bucket. The die is a special storage cylinder die for PC material. It is completely made of German technology and has better performance than other domestic manufacturers. It produces transparency and uniformity of the bucket. The degree reached a near perfect level. The machine is fully automated, high energy saving, low noise, fast speed, high efficiency, safe and reliable, and is the only choice for the production of PC buckets. This machine can also be widely used in chemical, petroleum, pharmaceutical, daily chemical, food, lighting, tools, automobiles, motorcycles, shoes, toys, etc., used to blow plastic barrels, chemical barrels, auto parts (water tanks, fuel tanks). , air conditioning air ducts, car tails), toys (wheels, hollow motorcycles, basketball hoops, children's castles), tool kits, vacuum cleaner pipes, stadiums and public car seats. Installation, commissioning, training, perfect quality assurance, full service, let you buy and use two assured.
1. Control system: The operation panel uses a 5.7-inch Chinese human-machine interface touch screen, and all operations, parameter setting, monitoring, product counting, wall thickness control and other visual operations. The device fault self-judgment shows that the operation is simple. Imported Japanese Mitsubishi PLC programmable controller has process parameter storage and transfer function, fast response, accurate positioning, and high stability of the system during operation.
2. Hydraulic system: all imported hydraulic valves, seals, electro-hydraulic proportional control. It has the characteristics of stable and reliable, accurate motion, long service life and fast response.
3. Extrusion system: It adopts hardened gear reduction gearbox and Japan imported Mitsubishi inverter, with screw frequency control, low noise, strong power, stable speed, long service life and energy saving; mixing screw, raw material adaptability Wide, better plasticizing quality, heating barrel and aluminum alloy heater, energy efficient.
4. Die system: It adopts the central injection material storage cylinder type die, and the horizontal bar is shot, which has high stability. The “first in, first out” storage type head has a reasonable and reliable structure.
5. Open and close mold system: pneumatic single-cylinder slide rail, fast and stable, four-plate, high-precision linear guide, hydraulic two-cylinder two-way open and close mold.
6. Type control system: optional Japanese MOOG and domestic 10 to 100 point wall thickness control system
7. Blowing system: optional blowing, side blowing, and upper blowing are optional.
8. Die cutter: Standard pneumatic cutter, fast standard.
9. Safety system: equipped with clamping protection device and light curtain sensing to ensure the safety of equipment and operators.
10. Electrical components: All international high-tech products are selected.
| Model | HT-90PC | |
| Suitable raw materials | PC | |
| actual production | PC 5 gallon bucket 720 gram weight | 1900 / day |
| PC 5 gallon bucket weigh | Based on appropriate strength | 600~800g (wall thickness controller control) |
| Product capacity | 1 cavity | 5~30L |
| Extrusion system | Screw diameter | 90mm |
| Screw length to diameter ratio | 22:1L/D | |
| Screw speed | 40r/min | |
| Plasticizing ability | 90kg/hr | |
| Number of screw heating segments | 4 segments | |
| Die | Number of dies | 1 |
| Storage tank volume | 4L | |
| Storage tank PC material capacity | 2kg | |
| Extrusion die diameter | 80mm | |
| Die heating section | 4 segments | |
| Opening and closing system | Number of stations | 1 |
| Number of templates | 4 | |
| Template size | 700*700*66mm | |
| Clamping force | 180KN | |
| Mold system | 1 cavity | 1 Cav |
| Maximum size of molds that can be installed | 700*500*500 | |
| Lifting system | Turbine reducer | 4 |
| power | power supply | 220~380V,3相50~60HZ |
| Screw motor power | 30Kw | |
| Opening and closing mode hydraulic motor power | 7.5kw | |
| Wall thickness control servo hydraulic motor power | 4kw< | |
| Screw heating power | 10kw | |
| Die heating power | 5kw | |
| Hopper dryer | 4.5Kw | |
| Fan power (4) | 0.12*4=0.48kw | |
| Total installed capacity | 58kw | |
| The actual power of the host | 20kw / hour | |
| Water source | External water source | |
| Air pressure | 0.8Mpa | |
| Gas usage | 0.5m3/ min | |
| Host size | 3910*2060*3190mm | |
| Auxiliary equipment | Low pressure air compressor 1 (required) | 0.8m3/min; 1.25mpa;7.5kw;0.32m3 |
| 1 gas storage tank | 0.42m3/ 0.8Mpa | |
| Oil and water dual-purpose mold automatic temperature control machine 1 | Heating power 4.5KW / motor power 0.5KW | |
| The above three auxiliary devices can be used without any additional auxiliary equipment. | ||
Please make sure your E-mail address is correct otherwise the recipient will not be able to reply.
