HT-75A automatic extrusion blow molding machine: one-step method, one-shot molding, hydraulic, fully automatic extrusion blow molding machine, automatic cutting and flashing device, can blow a variety of thermoplastics such as PE, PP, AS, etc. For any shape of raw material, the capacity is from 5 ml to 15 liters of plastic hollow container. The machine is fully automated, high energy saving, low noise, fast speed, high efficiency, safe and reliable. It is widely used in plastic packaging industry such as toys, food, beverage, medicine, chemical, pesticide, detergent, etc. Pesticide bottles, cosmetic bottles, large caliber bottles, hot filling bottles, etc. This machine has less investment, quick effect and convenient operation and maintenance. Security, commissioning, training, perfect quality assurance, full service, let you buy and use two assured, is the ideal choice for your purchase. The HT-75G machine has a single-die single-station.
| Model | HT-75 | |
| Suitable Materials | PE,PP,PS,ABS,EVA,AS... | |
| Output(Running Free | Depend on bottle design | 370 pcs/h |
| Product Volume | 1 cavity | 10L~20L |
| Die Head Amount | Piece | 1 |
| Work Station Amount | Piece | 1 |
| Extrusion Unit | Screw Diameter | 75mm |
| Screw L/D Ratio | 25:1 L/D | |
| Screw Speed | 80 r/min | |
| Plasticizing Capacity | 100kg/h | |
| Number of Heating Zone on Screw | 4 | |
| Die Head Unit | Volume of Storage Jar | 3L |
| Max Die-pin Diameter | 300mm | |
| Number of Heating Zone | 4 | |
| Mould Unit | 1 Cavity | 1 cavity |
| Mold Board Space | 350~1200mm | |
| Clamping Force | 220KN | |
| Power Unit | Electrical Source | 220/380V,3phase 50/60Hz |
| Total Heating Power | 20Kw | |
| oil Power | 15Kw | |
| Screw Motor Power | 22Kw | |
| Waterhead | Cooling Tower | |
| Air Supply Pressure | 0.6~0.8 MPa | |
| Auxiliary Equipments | Low Pressure Air Compressor 1 Set(requisite) | 1.0m3/1.0 MPa |
| Crusher 1 Set(optional) | 65 | |
| Mixer 1 Set(optional) | 200kg | |
Please make sure your E-mail address is correct otherwise the recipient will not be able to reply.
