HT-35A Full Automatic Extrusion Blow Moulding Machine is one-step method, one-time moulding, pneumatic, and features automatic cut. It is suitable for producing PP, PVC, PE, AS and other hollow plastic containers and bottles in all shapes from 5 ML to 350 ML, This machine is widely used to produce the hollow plastic containers for foods, toys, beverages, medicines, chemical products, pesticides, detergents, etc. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble shooting, maintenance and other benefit. For its good quality and our perfect service, it’s your best choice to use it .HT-35A has two die heads and four stations.
| Model | HT-35A | |
| Suitable Materials | PE,PP,PC,PVC,AS... | |
| Theoretical Output | Depend on bottle design | 4000Pcs/h(350ML) |
| Max. Product Volume | 1cavity | 350ML |
| Die Head Amount | Piece | 2 |
| Work Station Amount | Piece | 4 |
| Extrusion Unit | Screw Diameter | 35mm |
| Screw L/D Ratio | 22:1 L/D 20:1 L/D | |
| Screw Speed | 10~90r/min | |
| Plasticizing Capacity | 25kg/h | |
| Mould Unit | 1 Cavity 4 Sets | 1 Cavity 4 Sets |
| Max. Bottle Diameter | 40mm | |
| Mould Thickness | 40~70mm | |
| Mold Board Stroke | 70mm | |
| Clamping Force | 25KN | |
| Power Unit | Electrical Source | 220/380V,3phase 50/60Hz |
| Heating Power | 5Kw | |
| Motor | 4Kw | |
| Average Energy Consumption | 4.5Kw | |
| Air Pressure | 0.5Mpa | |
| Machine Size | L*W*H | 2500*1340*1780mm |
| Machine Weight | 1000kg | |
| Auxiliary Equipments | Low Pressure Air Compressor 1 Set (requisite) | 1.6m3 / 1.0MPa /15kw |
| Air Dryer 1 Set (optional) | 1.0m3 / 3.0MPa / 375KW | |
| Air Filter 2 Set (optional) | 1.0m3 / 3.0MPa | |
Please make sure your E-mail address is correct otherwise the recipient will not be able to reply.
